With a perfect blend of tube smoothness and an almost unbelievable level of detail and transparency, the new RP-7 essentially redefines what a reference level tube preamplifier can achieve.
The RP-7 is designed on the cutting edge RP-X hardware and software platform and every aspect of the RP-7 design is aimed at maintaining near perfect signal integrity. Beyond the computer optimized circuit topology, all of the capacitors, resistors and other critical parts are of ultra-high quality assuring the highest sonic integrity. The sophisticated electrical design is based on pure class A tube amplification with mosfet output buffering to provide huge drive along with a super low output impedance.
Beyond the excellent sound, the feature rich RP-7 provides all of the functions demanded of a luxury hi-end preamp. Included are a home theater bypass, processor loop, mono button, defeatable display, slow start circuitry, and a host of other features. A full function remote provides additional convenience. Two pairs of XLR balanced inputs and three pairs of RCA line level inputs allow for numerous source components while two pairs of XLR balanced outputs along with two pairs of RCA variable outputs facilitate a wide range of output connectivity. Also included is a high power tube based headphone amplifier capable of driving even the most difficult headphones.
The attractive industrial design includes an easy to read OLED display that further enhances the preamp's sleek and elegant appearance. The display provides all relevant information in large easy to read azure tinted characters. The ultra-high quality tactile buttons and knobs further add to the exclusive feel of the RP-7.
- Four 12AU7 tube mu-follower design
- Ten function remote control
- OLED display (defeatable)
- Home Theater bypass/Unity gain inputs
- Three pairs of RCA line leve inputs
- Two pairs of fully balanced XLR inputs
- One pair of fixed outputs
- Two pairs of RCA variable outputs
- Two pairs of fully balanced XLR outputs
- Processor loop
- Mono button
- Heavy duty gold plated RCA inputs
- Machined aluminum faceplate and knobs
- Tube based high power headphone amp
- Massive power supply
- Slow start turn on sequencing
- Auto mute at turn on/turn off
- Detachable IEC power cord
- Fully tested, burned in and auditioned
- 3 year limited warranty (6 months on tubes)
- Proudly hand crafted in the USA!
- Tube complement: 4 x 12AU7/ECC82 tubes
- Frequency response: 1Hz – 100KHz +/- 1 dB
- THD: <0.1>#/li###
- Gain line stage: 14 dB (20dB XLR)
- Rated output: 1V
- Maximum output: 30V
- Output impedance: <10 Ohms
- Dimensions: 18.5 ”W X 4.5 ”H X 17” D
- Weight 30 pounds
- Shipping weight 45 pounds
- Power requirements 115/230V – 50/50Hz
Our amplifier designs combine the finest in tube circuit topology with meticulously engineered circuit layout to achieve superior performance. Unflagging attention to the integrity of the audio signal path and power supplies results in truly superior designs. The most discriminating audiophile will delight in the impeccable fidelity of recordings reproduced through our amplifiers. The matchless quality of Rogue amplifiers is obvious at first glance. However, Rogue’s quality is not just skin deep. Ultra-high tolerance components, two-ounce copper circuit boards, and silver plated switches are just a few of the many features which separate Rogue products from the competition. Our amplifiers have also been designed to be extremely reliable. Electronic components are rated far beyond their intended use, and only the highest quality components are incorporated into our designs. The rugged chassis are treated to resist scratching and corrosion and the machined aluminum faceplates are anodized to protect their appearance. At Rogue Audio, we believe that a truly great performing amplifier should dress the part. And from the heavy aluminum faceplate and knobs to the gold connectors in the rear, Rogue amplifiers speak to the audiophile’s aesthetic sense. Our expressive appearance is the brainchild of world class industrial designers who have created a perfect unity of form and function. The sophisticated styling and elegant lines of our amplifiers are intended to please the upscale tastes of high-end devotees. High-end amplifiers typically command stratospheric prices. Rogue Audio was founded on the belief that great amplifiers can be designed and manufactured at affordable prices. Our amplifiers are engineered using a quality-by-design philosophy, and every one of our components is hand assembled and tested by highly skilled technicians and engineers. The confidence we have in our products is evidenced by a generous warranty that is certain to please today’s quality-conscious consumer. To audition a Rogue Audio amplifier contact us for the location of your nearest authorized Rogue retailer -- You’ll be delighted you did. Rogue Audio Amplifiers...An Intelligent Indulgence.
The Rogue Audio Mission: At Rogue Audio we design and manufacture vacuum tube amplifiers. There is fierce competition in this market and we will only survive by delivering a superior product and superior service - we have the engineering and managerial talent to do so. Our core competencies are electrical, mechanical and production engineering, along with an overarching passion for excellence. These skills will be used to create products that offer outstanding value in the high-end marketplace. Rogue Audio amplifiers will always be engineered to provide the four key elements of audio value:
- superior sonics - high quality and reliability - an outstanding appearance - great value
Our philosophy is simple - We will never design any amplifier that we would not purchase for ourselves.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.