Precision, musicality, and impact. The Rogue Stereo 100 power amplifier will thrill you.
Made in America - priced right in Australia - drives Magnepan beautifully
With 100 watts of pure tube power, you can be sure that your amplifier won’t run out of steam before the musicians do. The heart of the Stereo 100 consists of four matched KT120 output tubes operating in push-pull configuration. A massive fully regulated power supply ensures that low frequency information will not go unheard, and that the power and attack of transient musical passages will be recreated in full. And with a simple flip of a switch, audiophiles can choose between "pure triode" and "ultra-linear" operation to suit their tastes and power requirements. The transparency and power of the Stereo 100 is testimony to a design that truly transcends that of the competition.
While the build quality is readily evidenced in the exquisitely sculpted appearance of the Stereo 100, the beauty of this amplifier is more than just skin deep. From the Mundorf EVO Oil coupling capacitors to the custom wound output transformers, the audio signal travels through only the finest components available. With this winning combination of leading edge circuit topology, great components, and a stunning appearance, you can be certain that you are investing in an amplifier design that only Rogue Audio can deliver.
Based on our award winning Stereo 100 amplifier, the new Dark version features power supply modifications, upgraded coupling capacitors, PRP and "Nude" Vishay resistors (in critical spots) along with upgraded Cardas binding posts and RCA jacks. Also included are premium small signal tubes to bump the performance up to an even higher level. Now you can finally have the DNA of our flagship Apollo Dark monoblocks in a simpler stereo package.
- Ultra-wide bandwidth output transformers
- Massive fully regulated high voltage supply
- Matched quad output tubes
- Heavy-duty gold plated RCA inputs
- Heavy-duty gold plated binding posts
- User selectable 4 and 8 ohm output taps
- User selectable triode or ultralinear output
- (4) KT120, (2) 12AU7, (2) 12AX7 tube complement
- Built in bias meter
- Integral tube cage
- Machined aluminum faceplate
- Mechanically isolated transformers
- Heavy (2 ounce) copper circuit board
- All precision components
- Fully tested, burned in, and auditioned
- 3 year limited warranty (6 months on tubes)
- output power: 100 WPC minimum
- input impedance: 200K Ohms
- frequency response: 5Hz - 50KHz ± 1dB
- THD: <0.1% typ., <1.0% at rated power
- input sensitivity: 1.0V RMS
- dimensions: 18"W x 17"D x 7"H
- weight: 60 lbs.
- power requirements: 115/60Hz or 230V/50Hz
Our amplifier designs combine the finest in tube circuit topology with meticulously engineered circuit layout to achieve superior performance. Unflagging attention to the integrity of the audio signal path and power supplies results in truly superior designs. The most discriminating audiophile will delight in the impeccable fidelity of recordings reproduced through our amplifiers. The matchless quality of Rogue amplifiers is obvious at first glance. However, Rogue’s quality is not just skin deep. Ultra-high tolerance components, two-ounce copper circuit boards, and silver plated switches are just a few of the many features which separate Rogue products from the competition. Our amplifiers have also been designed to be extremely reliable. Electronic components are rated far beyond their intended use, and only the highest quality components are incorporated into our designs. The rugged chassis are treated to resist scratching and corrosion and the machined aluminum faceplates are anodized to protect their appearance. At Rogue Audio, we believe that a truly great performing amplifier should dress the part. And from the heavy aluminum faceplate and knobs to the gold connectors in the rear, Rogue amplifiers speak to the audiophile’s aesthetic sense. Our expressive appearance is the brainchild of world class industrial designers who have created a perfect unity of form and function. The sophisticated styling and elegant lines of our amplifiers are intended to please the upscale tastes of high-end devotees. High-end amplifiers typically command stratospheric prices. Rogue Audio was founded on the belief that great amplifiers can be designed and manufactured at affordable prices. Our amplifiers are engineered using a quality-by-design philosophy, and every one of our components is hand assembled and tested by highly skilled technicians and engineers. The confidence we have in our products is evidenced by a generous warranty that is certain to please today’s quality-conscious consumer. To audition a Rogue Audio amplifier contact us for the location of your nearest authorized Rogue retailer -- You’ll be delighted you did. Rogue Audio Amplifiers...An Intelligent Indulgence.
The Rogue Audio Mission: At Rogue Audio we design and manufacture vacuum tube amplifiers. There is fierce competition in this market and we will only survive by delivering a superior product and superior service - we have the engineering and managerial talent to do so. Our core competencies are electrical, mechanical and production engineering, along with an overarching passion for excellence. These skills will be used to create products that offer outstanding value in the high-end marketplace. Rogue Audio amplifiers will always be engineered to provide the four key elements of audio value:
- superior sonics - high quality and reliability - an outstanding appearance - great value
Our philosophy is simple - We will never design any amplifier that we would not purchase for ourselves.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.